Concrete Placement Machine

Built to perform:

• Low profile steel frame ensures durability.
• Low center of gravity gives stability in low slump concrete.

Husqvarna CFG is a petrol-powered generator with one to four outlets for powering AX and Vibrastar high-frequency electric concrete vibrators anywhere. The generator is motorized by a Honda petrol engine and features side covers and a solid frame for transport wheels.

Husqvarna CF is an electrically-powered frequency converter that enables you to power up your concrete vibrator system anywhere. The converter comes equipped with one to four outlets for powering AX and Vibrastar high-frequency electric systems. A permanent magnet delivers stable power.

AME 1600 is is a portable electric drive unit for the modular flex-shaft concrete vibrators in the AT series. The instant speed and power from the drive unit delivers rapid acceleration, while the high-quality components and oil lubrication ensure long life and keep life cycle costs low.

Husqvarna CF is an electrically-powered frequency converter that enables you to power up your concrete vibrator system anywhere. The converter comes equipped with one to four outlets for powering AX and Vibrastar high-frequency electric systems. A permanent magnet delivers stable power.

Husqvarna CF is an electrically-powered frequency converter that enables you to power up your concrete vibrator system anywhere. The converter comes equipped with one to four outlets for powering AX and Vibrastar 42 Volt/200 Hz high-frequency electric systems. A permanent magnet delivers stable power.

Husqvarna CF is an electrically-powered frequency converter that enables you to power up your concrete vibrator system anywhere. The converter comes equipped with one to four outlets for powering AX and Vibrastar high-frequency electric systems. A permanent magnet delivers stable power.

The Husqvarna EP series offers external pneumatic high speed vibrators with high centrifugal force and acceleration. They are suitable for all concrete mixes on civil engineering sites and in precast factories. One single moving part improves the possibility of trouble-free operation and an integrated noise reducer makes these vibrators very quiet, further improving your work environment. In order to increase flexibility and cost effectiveness, the vibrators are mounted on quick-release brackets for easy portability, thus fewer units are required. With a compressor at the worksite a pneumatic vibration solution is both economic and efficient.

Quick-release brackets:

• You can secure the vibrator and increase flexibility during use with the quick-release brackets.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

Adjustable centrifugal force:

• You have the flexibility to adjust as you like to suit the job at hand.

Trouble-free operation:

• One single moving part improves the possibility of trouble-free operation.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

The Husqvarna external electric high speed vibrators give excellent results thanks to adjustable, high centrifugal force. They can be used in vertical or horizontal applications and are ideal for heavy-duty work in precast factories. Preferred concrete is medium to high slump. In order to increase flexibility and cost effectiveness, the vibrators are mounted on quick-release brackets for easy portability, thus fewer units are required. High-quality components and materials help you optimize the life cycle and keep maintenance costs down.

Adjustable centrifugal force:

• You have the flexibility to adjust as you like to suit the job at hand.

Quick-release brackets:

• You can secure the vibrator and increase flexibility during use with the quick-release brackets.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

Service friendly:

• Easy to replace components. Bearings on the ER series or lamella on the EP series.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

The Husqvarna external electric normal speed vibrators give excellent results thanks to flexible, high centrifugal force. They are optimized for horizontal applications but also perform impressively in vertical applications, making them ideal for heavy-duty work in precast factories. Preferred concrete is medium to high slump. A normal speed vibrator facilitates control of the vibrations so that the concrete does not get over-vibrated. High-quality components and materials help you optimize the life cycle and keep maintenance costs down.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

The Husqvarna external electric normal speed vibrators give excellent results thanks to flexible, high centrifugal force. They are optimized for horizontal applications but also perform impressively in vertical applications, making them ideal for heavy-duty work in precast factories. Preferred concrete is medium to high slump. A normal speed vibrator facilitates control of the vibrations so that the concrete does not get over-vibrated. High-quality components and materials help you optimize the life cycle and keep maintenance costs down.

Quality that lasts:

• High-quality components and materials such as die cast iron help you optimize life cycle and keep maintenance costs down.

AMD 3000 is a diesel-powered drive unit for Husqvarna AA and AZ mechanical concrete vibrators. The fuel-efficient, rubber-mounted Lombardini LD 150 diesel engine delivers reliable power all workday long in all conditions, and is easy to service if needed. A sturdy coupling with quick release allows for problem-free power transmission to the flexible shaft.

AME 1600 is is a portable electric drive unit for the modular flex-shaft concrete vibrators in the AT series. The instant speed and power from the drive unit delivers rapid acceleration, while the high-quality components and oil lubrication ensure long life and keep life cycle costs low.

Smooth control:

• The vibration reduced and height adjustable handle is equipped with ergonomically assembled controls and smooth clutch engagement.

The Husqvarna Soff-Cut 4000 self-propelled petrol saw is designed for heavy-duty commercial, industrial and paving applications. Features include a 20 hp twin-cylinder engine with overhead valves, heavy-duty air cleaner, electric start, full pressure lubrication, hydraulic valve lifters and a mechanical fuel pump. Three blade widths can be used, allowing different joint widths and crack control simultaneously.

Engineered to last:

• Triangular frames, and square tubes provide better rigidity. Oscillating bearing with grease nipples extend the product life-time and serviceability.

AMG 3200 is a petrol-powered drive unit for Husqvarna AA and AZ mechanical concrete vibrators. The fuel-efficient, rubber-mounted Honda GX 160 petrol engine delivers reliable power all workday long in all conditions, and is easy to service if needed. A sturdy coupling with quick release allows for problem-free power transmission to the flexible shaft.

A self-propelled dry-cutting petrol saw ideal for medium to heavy-duty commercial, industrial and paving applications. The Husqvarna 2000 is designed for versatility, ease of use and high production capabilities. Three blade widths can be used, allowing for different joint widths and crack control simultaneously. Features include a 9 hp engine with automatic compression release for easy starting, chain driven overhead cam system, superior cooling, excellent lubrication system, and a cyclone air cleaner to increase engine longevity.

The Husqvarna BT 90 electric truss screed is engineered to handle floors, runways and bridges that need compaction, levelling and finishing. Easy to assemble by a single operator and adjust camber. Many configurations possible with accessories, such as winches and outriggers to cover your day to day needs.

BV 30 is a versatile, petrol-driven walk-behind concrete power screed designed to deliver a high-quality slab. It is equipped with a twin de-vibrated and foldable handle, which can be adjusted for comfort and manoeuvrability. Interchangeable blades allow for five different working widths, while the non-corrosive chromed steel handle provides maximum strength and superior finish.

BV 20 G is a petrol-powered, vibrating walk-behind concrete power screed designed to provide a high-quality slab. The fuel-efficient Honda engine delivers reliable operation, and the non-corrosive aluminium alloy finish ensures easy maintenance. For perfect results, the vibrations can be adjusted with the engine speed. It can be used directly on thin slabs up to 150mm without vibrating beforehand

The Husqvarna 4200 self-propelled dry-cutting petrol saw has a low-noise enclosed design and is ideal for heavy-duty commercial, industrial and paving applications. The 4200 is designed for peak performance. Features include a 23 hp twin-cylinder petrol engine, three-stage cyclonic air cleaner, oil cooler, full-pressure oil lubrication, hydraulic valve lifters, mechanical fuel pump and an oil alert light. Multiple blade widths can be used, allowing different joint widths and crack control simultaneously.

The Husqvarna Soff-Cut 150 saw is designed for residential and light commercial applications. The lightest petrol saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.