Husqvarna Power Cutters

Cutting a rail track takes power, precision and speed. The K 1270 Rail is the market's most powerful cutter, customised for railways, tram tracks and metro systems. It cuts fast and straight, the attachment mounts quickly to the rail and the double attachment mountings means you can cut from any direction.

Magnesium blade guard:

• With decreased weight and reflective decals for high visibility in smoke and water spray, which enhances control of the cutter

The K 4000 Cut-n-Break enables you to cut as deep as 400 mm from one side. Suitable for flush cutting close to walls and floors as well as for smaller jobs like window openings where you want to avoid overcutting at the corners.

The Husqvarna K 770 is a powerful all-round power cutter with features that make it one of the best power cutters on the market. Equipped with semi-automatic SmartTension system allows for optimal power transmission, minimum wear and maximum belt life. The light weight, outstanding power-to-weight ratio, the reliable start and exceptionally low vibrations mean less strain and maximized productivity. Suitable for road work and easy to cut in a straight or curved track or close to sidewalk when used with KV7 trolley.

Feature

• Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.

Easy and optimal belt tensioning

• The semi-automatic Smart Tension minimises the risk of under- and over tensioning.

Light and powerful

• A light, compact and powerful machine with superior power-to-weight ratio.

Long service intervals

• A strong Poly-V belt combined with our maintenance-free DuraStarter and efficient filter-system Active Air Filtration ensure long service intervals.

Heavy-duty cutting arm

The new-designed cast magnesium crankcase has a three-bolt joint to attach the cutting head, enabling higher torsional rigidity than the previous two-bolt solution.

• Digital ignition with optimised timing
• Exceptionally low vibrations
• Easy to start
• Maintenance-free air filter
• High power with less fuel
• Optimized engine performance
• Less slurry and low water consumption
• Easy to change blade guard position
• Fits multiple blade bushings
• Less emissions and fuel consumption
• Blade retarder
• Maintenance-free starter
• Reduced wear
• Cuts close to walls or ground
• Active Air Filtration
• Anti-vibration system
• DuraStarter
• Poly-V belt
• SmartCarb
• Asphalt
• Blocks, curbstones and pavers
• Burying of cables
• Cast concrete
• Floors and walls
• Rails
• Rescue cutting
• Blade Shaft And Bearings

Husqvarna K 770 VAC is a lightweight power cutter for dry cutting and has the power and all qualities of the standard K 770 while adding the benefit of dust extraction. With an easy to connect 2' hose dust is effectively transported to an external dust extractor. K 770 VAC has an impressive maximum cutting depth of 122 mm, very close to that of a 14' machine. Suitable with a Husqvarna S 26 dust extraxtor.

Feature

• Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.

Easy to connect

• The 2' hose is easely connected to an external dust extractor

Effective cutting

• The powerful engine paired with the external dust extractor enables superior dry cutting performance

Maximised cutting depth

• The integrated gearbox, positioning of the pulley and the 60 mm flange enables a cutting depth of 123 mm, very close to that of a 14" machine.

Smart and effective protection

The double foldable protections enable better dust handling and fold into the blade guard during operation.

• Easy and optimal belt tensioning
• Light and powerful
• Heavy-duty cutting arm
• Long service intervals
• Easy Start
• Exceptionally low vibrations
• Easy to start
• Maintenance-free air filter
• High power with less fuel
• Optimised engine performance
• Easy to change blade guard position
• Fits multiple blade bushings
• Less emissions and fuel consumption
• Blade retarder
• Maintenance-free starter
• Reduced wear
• Cuts close to walls or ground
• Anti-vibration system
• DuraStarter™
• Poly-V belt
• SmartCarb™
• Asphalt
• Blocks, curbstones and pavers
• Burying of cables
• Floors and walls
• Blade Shaft And Bearings

Husqvarna K 770 Dry Cut is a lightweight power cutter for dry cutting and has many of the proven qualities of the standard K 770 while adding the benefit of dust extraction. K 770 Dry Cut is equipped with an integrated fan housing and the strong airflow (100 cfm) effectively removes the dust and transports it to the resuble bag where it’s kept contained thanks to the integrated nozzle. It has an impressive maximum cutting depth of 122 mm, very close to that of a 14'' machine.

Deep cutting:

• Thanks to the peripheral drive you can cut far deeper than with a traditional power cutter.
• The cutting depth of 270 mm is sufficient to cut through a normal wall from one side only.

This electric all-round cutter minimises the amount of water and slurry. Unlike other electric cutters, the blade rotates forward, cutting into the material efficiently with minimum effort on the operator. K 4000 is easily adaptable for dry cutting with the Vac attachment accessory for minimal dust generation.

Hydraulic power cutter K 3600 MK II provides eccentric drive of the blade meaning the cutting depth is a huge. Suitable for a wide window of applications. It's particularly well-suited for working indoors due to no exhaust fumes and low noise levels.

Our most powerful rescue cutter is specially developed for rescue and clearing work. The magnesium blade guard is designed to be visible in smoke and water spray, and the digital ignition system provides a reliable and quick start in any emergency situation. Used and trusted by fire services around the world.

The Husqvarna K 535i is a lightweight battery power cutter with low vibrations and user-friendly ergonomics. The excellent power-to-weight ratio makes it a versatile addition for lighter land or hardscaping jobs and perfect for quick and efficient cuts. Suitable for concrete garden plates, granite, roof and floor tiles. K 535i is adaptable for wet and dry cutting. Fits with Husqvarna BLi200/300 batteries.

Husqvarna K 6500 is equipped with high frequency PRIME technology, making it our most powerful electric cutter ever. The high power output, well-balanced body and low vibration levels make this machine very efficient and easy to use. The PRIME product range enables you to combine the system that is most efficient for your business. The K 6500 can be used with either the PP 65 or the PP 220 as a power source. Expand the system as your needs develop.

Feature

• Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.

Impressive power

• High power output which operates on both 3-phase (5.5 kW) and 1- phase (3 kW) at 220 - 240 V/180-480 V. 

Magnesium blade guard

• Contributes to a light weight which gives an improved power-to-weight ratio and cutting depth now up to 155 mm. New stepless adjustment makes it easier to change cutting position.

Reliable and efficient

Improved water system with blade guard nozzles, enlarged water housing and brass connector for incoming water contributes to reliability and efficiency of the cutter

• Automatically optimised power and rpm
• Overload protection
• Perfect for indoor use
• On/Off water trigger
• Pulling rotation
• Wet cutting kit

Husqvarna K 6500 Ring is equipped with high frequency PRIME technology, making it our most powerful electric cutter ever. The high power output, well-balanced body and low vibration levels make this machine very efficient and easy to use. The PRIME product range enables you to combine the system that is most efficient for your business. The K 6500 Ring can be used with either the PP 65 or the PP 220 as a power source. Expand the system as your needs develop.

Feature

• Want to take a closer look? Learn more about the product in depth by exploring its features and benefits.

Deep cutting

• Thanks to the peripheral drive you can cut far deeper than with a traditional power cutter. The cutting depth of 270 mm is sufficient to cut through a normal wall from one side only.

Impressive power

• High power output which operates on both 3-phase (5.5 kW) and 1- phase (3 kW) at 220 240 V/180-480 V.

Exceptionally low vibrations

• Vibrations below 2.5 m/s2 in the cutter handles for more comfort and longer operation periods.

Ergonomic design
The ergonomic design with low system weight and well balanced body with optimally positioned handles minimises the strain on your body.

• Overload protection
• Automatically optimised power and rpm
• Flexible power setup
• On/Off water trigger
• Pulling rotation
• Perfect for indoor use
• Wet cutting kit
• Adjustment to openings
• Concrete, stone and masonry
• Pipes

The Husqvarna K 2500 works with a traditional 400 mm cutting blade, and is frequently used for pre-cutting where you finish the job with a K 3600. The K 2500 is surprisingly light and manoeuvrable, powerful and durable, so you can work efficiently and comfortably for longer periods. As you avoid exhaust fumes and high noise levels, it’s particularly well-suited to working indoors.

K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations. Suitable for road works when used with the corresponding KV 970 trolley. The trolley also means you can fully concentrate on the cutting job.